A large number of people are now using cell phone signal boosters for solving the issues associated with poor cell reception. These are very simple devices that have only three parts including an exterior antenna, an amplifier, and an interior antenna. Most of the cell phone service boosters are easy to install and you do not need much technical expertise for installing them. Hence, we provide you some of the important things you have to notice when installing your cell phone signal booster.
Things To Notice When Installing Signal Boosters
As mentioned above, a signal booster will have three parts. Among them the exterior antenna is used for receiving signals from the outside, hence, you have to mount them on your roof or other outside locations, where it will be able to receive signals.
Mounting The External Antenna
There are two types of exterior antennas including omni-directional antenna and uni-directional antenna. Omni-directional antennas are easy to install, just mount them on your roof and it will be able to receive signals from a 360-degree wide-angle. It can also support multiple carriers and can accept the signals from multiple cell towers.
Uni-directional antennas might need a little bit of technical expertise for installing. They receive signals from a 45-degree wide area. Hence, you have to mount it in the direction of your nearest cell tower for receiving signals.
Distance Between Internal And External Antennas
Another important thing you have to notice when mounting your internal and external antennas is their distance. If they are mounted close to each other, the signal from the internal antenna can interfere with the signal reception of your external antenna. Hence, make sure that there is at least a 5-meter distance between your internal and external antennas.
Use Splitter For Mounting More Than One Internal Antenna
Sometimes you might want to install more than one interior antenna on different floors or rooms. Here, a device called splitter can be helpful for you. This device will help you to mount more than one interior antenna for the same booster. Hence, you don’t have to buy separate boosters for using on different floors or rooms. However, splitters might not be supported by every brand, hence, you may not be able to use it with every booster.
Signal boosters are very easy to install. But you have to make sure that your internal and external antennas are mounted properly and the interfaces are connected accurately. This will help you to ensure the maximum performance of your cell phone signal boosters.